The indoor set from The Pure Factory consists of three bags with a sieve thickness of 220mü and 70mü and 38mü with a diameter of approx. 30cm.

These bags are ideal for the further processing of plant residues with large resin glands.

While the coarser bag retains the plant residues, the finer ones filter out the resin crystals that get stuck in the sieve.

Extraction with the extraction bags is a cost-effective and simple option for the production of resinous extracts without much effort.

Always make sure that the coarsest bag is at the top and the finest at the bottom.

Application;

With Resinator
Attach the extraction bags to a cauldron. Place the fine-meshed bag in the kettle first.

Place the coarse mesh IN the fine mesh.

Wash out the plant residues in the resinator for 15 minutes.

Drain the water into the prepared boiler.

First take out the coarse bag and squeeze out the water well.
Place it in a separate cauldron.

Now take out the fine bag and squeeze out the water well here as well.

Remove the remaining extract and spread it on a clean, dry surface, as airy as possible.

Allow the resin to dry for at least 48 hours.

Taste always comes with time.

You can also use the plant residues from the coarse sieve for further use.

However, this has a lower purity.

Without resinator
Prepare the bags as described above.

Fill a separate kettle about halfway with cold water.

Now pour about 2 kilos of chopped ice into the water. Add the plant residues to the water.

Stir the water well and several times. You can also use a blender, as long as it does not puree the plant residues.

Now pour the water into the prepared bag kettle and continue as described above.